June 21, 2024

Most homeowners, if not all, take their garage door for granted. However, when it begins to make unusual sounds or does not open and shut properly, it may be a great annoyance. Misaligned tracks are one of the most typical garage door problems.

However, if it is not functioning correctly, you will soon discover how crucial it is! This blog article will go through how to adjust garage door tracks. This is a task for a professional, but if you’re feeling adventurous, we’ll teach you the fundamentals. Keep in mind that altering the tracks might be harmful, so if you are unsure, please contact an expert!

Tools and Materials: To begin, grab a few tools and supplies. A tape measure, a level, a hammer, and some shims are required. Once you have everything you need, proceed as follows:

– Measure the distance between your garage door’s tracks on both sides. On all sides, the tracks should be the same distance from the floor.

– If the tracks are not level, level them using a hammer and shims.

– After the tracks have been leveled, measure the distance between them once again. The distance should be around 12 inches.

– If the tracks are too far apart or too close together, the brackets that hold the tracks in place must be adjusted.

– Using a tape measure, locate the center of each track and mark it with a pencil.

– Locate and drill new holes in the matching markings on the garage door frame.

– Move the tracks to the new holes and bolt them down.

Garage Door Tracks: T-tracks and J-tracks are the two kinds of garage door tracks. T-tracks are made up of a horizontal section that connects to the wall and a vertical piece that extends to the ceiling. J-tracks are L-shaped and connect to the ceiling directly. Most garage doors feature T-tracks, but if you’re unsure, contact a professional.

How to Tell If Your Garage Door Tracks Need Adjusting: If your garage door is producing noise, it’s a good sign that the tracks need to be adjusted. You may also notice that the door isn’t properly opening or shutting. If there are any gaps in the tracks, this is another indication that they need to be modified.

Adjusting Garage Door Tracks:

Start by releasing the screws or nuts that secure the track to the wall or ceiling if you’re adjusting it manually. Once it’s free, use a mallet to slide it into the proper position. Then, return the screws or bolts to their original positions. Rep the procedure for the other track. Again, this is a risky task, so if you don’t feel comfortable performing it, please contact a professional!

Problem Solving The Issue: The first step is to identify the problem. If your garage door is creating noise, it’s most likely due to misaligned tracks. If the door is not opening or closing correctly, the springs or rollers may be broken. Once you’ve identified the issue, you may start modifying the tracks.